Qingdao Henglin Group
ceoqu@henglingroup.cn
Add
Address: Haixi Road and Ling Shanwan Road, Huangdao District, Qingdao City
Tel
+86-13869869238
Points to note when modeling machine
Classification：
Industry News
2019/09/15 15:28
Page view：
The molding machine is a common casting machine. When using the molding machine, pay attention to its operation points and ensure safe use during work. Many people don't know much about the use of the molding machine. They think that as long as they are put into use, they can work normally.
1. Personnel who have not been trained in the operation of the molding machine shall not operate the equipment.
2. Before starting the molding machine, check whether there are any conductors in the moving parts, and whether there are non-equipment operators close to them. Do not put tools and other debris on the device.
3. The molding machine equipment is not allowed to touch the moving parts and electrical components during operation.
4. After repairing, inspecting, or adjusting the solenoid valve, it may not return to the original state. After power-on and ventilation, observe it carefully to avoid accidental danger.
Pay attention to the above aspects when operating the molding machine. If you operate correctly, the molding machine will become your powerful tool.